Engineering, 19.10.2021 17:50 heber9609
2. Two formations, each 25 m thick, overlie one another. If a constant-velocity vertical flow field is set up across the set of formations with h = 120 m at the top and h = 100 m at the bottom, calculate h at the internal boundary. The hydraulic conductivity of the top formation is 0.0001 m/s and of the bottom formation 0.0010 m/s. Plot head vs. depth. Is the gradient constant, or does it change at the boundary between formations? Why must the gradient be larger in the unit with lower conductivity?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
You know the right answer?
2. Two formations, each 25 m thick, overlie one another. If a constant-velocity vertical flow field...
Questions
Health, 19.11.2019 03:31
Social Studies, 19.11.2019 03:31
Social Studies, 19.11.2019 03:31
Mathematics, 19.11.2019 03:31
