Engineering, 11.01.2021 15:50 aaronhorowitz36

J & M manufacturing is facing a number of problems within its production lines and decided appoint you as a production manager of the company, you are required by management to manage the entire production process and operations of the company in order for the production process to run very smoothly. Along the line, you are faced with Bottleneck work centers that are constraints, limiting the number of outputs that your manufacturing system is supposed to produce. As a newly appointed production manager, Identify and explain in paragraphs, the Industrial Engineering techniques that you are going to use in solving this problem.
Also use Diagrams to show your conceptual production lines and how some of this techniques will help in solving the current problems that the company is facing

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

Answer

You know the right answer?

J & M manufacturing is facing a number of problems within its production lines and decided appoi...

Questions