Engineering, 20.11.2019 17:31 ae02705

Apower shovel with a dipper of 1.5 cubic yard capacity has a standard operating cycle time of 60 seconds. the excavated material which has a swell factor of 1.08 will be disposed by a dump truck with a 7.5 cubic yard capacity at a dumpsite 5 miles away. the average speed of a dump truck is 25 mph and the dumping time is 75 seconds. both the power shovel and the dump truck are operated 8 hours per day. a. find the daily standard production rate of the power shovel. b. find the daily standard production rate of the dump truck and number of trucks required. c. if the work conditions at the site that affect the productivity of the shovel can be represented by four factors f1 = 0.940, f2 = 0.952, f3 = 0.850 and f4 = 0.750, determine the job-site productivity and the actual cycle time. d. if the work conditions at the site affect the productivity of the dump truck can be represented by three factors f1 = 0.952, f2 = 0.700 and f3 = 0.750, determine the job site productivity of the dump truck, and the number of dump trucks required.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

Answer

You know the right answer?

Apower shovel with a dipper of 1.5 cubic yard capacity has a standard operating cycle time of 60 sec...

Questions