subject
Physics, 29.07.2019 02:00 jenkuehn9220

An ordinary workshop grindstone has a radius of 6.50 cm and rotates at 5500 rpm. (a) calculate the magnitude of the centripetal acceleration at its edge in m/s2 and convert it to multiples of g. g (b) what is the linear speed of a point on its edge? m/s

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 22:00
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
question
Physics, 22.06.2019 16:00
Amichelson interferometer operating at a 600 nm wavelength has a 3.02-cm-long glass cell in one arm. to begin, the air is pumped out of the cell and mirror m2 is adjusted to produce a bright spot at the center of the interference pattern. then a valve is opened and air is slowly admitted into the cell. the index of refraction of air at 1.00 atm pressure is 1.00028.how many bright-dark-bright fringe shifts are observed as the cell fills with air?
Answers: 1
question
Physics, 22.06.2019 17:00
If you wanted to move an electron from the positive to the negative terminal of the battery, how much work w would you need to do on the electron? enter your answer numerically in joules.
Answers: 1
question
Physics, 22.06.2019 23:30
What kind of waves require a medium to travel? question 6 options: light waves mechanical waves all waves need a medium to travel electromagnetic waves
Answers: 1
You know the right answer?
An ordinary workshop grindstone has a radius of 6.50 cm and rotates at 5500 rpm. (a) calculate the m...
Questions
question
History, 03.12.2020 06:50
question
Physics, 03.12.2020 06:50
question
English, 03.12.2020 06:50