For an RLC circuit in the limit of a very low driving frequency, what is the effective behavior of the capacitor and inductor

For problems 1-3, consider a simple dc brush motor with a permanent magnet stator. with an an consider a simple dc brush motor with a permanent magnet ae supply voltage of 100 v, the no-load speed of the motor is 1000 rpm. this motor can provide a torque of 1.9 n-m at 800 rpm drawing a current of 2 a current are both zero at no load.) 1. with an armature supply voltage of 100 v, the motor is operated at 900 rpm. what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input? what is the energy efficiency of the motor? with an armature supply voltage of 100 v, the motor is operated at 1100 rpm (where it acts as a generator). what torque input is required? what mechanical power is required what current is generated? what is the electrical power generated? what is the energy efficiency of the motor acting as a generator? 2. with an armature supply voltage raised to 120 v, the motor is operated at 1000 rpm. what is the no-load speed? what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input what is the energy efficiency of the motor? 3.

Researchers determine that the biodiversity in a woodland region is declining. they identify two major threats to the region's biodiversity, a method to address each threat, and the expected outcome of each method. this information is shown in the table. a) reforestation would not benefit many species because most forest species live on the ground. b) reforestation would take the longest time to be effective because trees take several years to grow. c) biological augmentation would benefit only a few species because is is typically not very effective. d) biological augmentation would take less time to ve effective because it targets the majority of prey species.

Wind and moving water provide energy. question 1 options: chemical mechanical thermal none of the above