There are three holes in the container given below. In which of the holes the pressure will be more. Why?

current and voltage can both be different in different parts of a circuit so it matters where you place the ammeter and voltmete

-first use of geothermal energy occurred more than 10,000 years ago in north america by american paleo-indians

-the first industrial use of geothermal energy began near pisa, italy in late 18th century

-in 1904, italian scientist piero ginori conti invented the first geothermal electric power plant in which steam was used to generate the power

-with the above experiment, the first geothermal plant in usa started in 1922 with a capacity of 250 kilowatts

-however, in 1946 first ground-source geothermal heat pump installed at commonwealth building in portland, oregon

-during the 1960’s, pacific gas and electric began operation of first large scale geothermal power plant in san francisco, producing 11 megawatts

-in 1973, when oil crisis began many countries began looking for renewable energy sources and by 1980’s geothermal heat pumps (ghp) started gaining popularity in order to reduce heating and cooling costs

-as effect of climate change started showing results, governments of various countries joined hands to fight against it, for which kyoto protocol was signed in japan in 1997, laid out emission targets for rich countries and required that they transfer funds and technology to developing countries, 184 countries have ratified it

hope this

initial speed when it is dropped is 150 ft/s

now at the same moment the acceleration due to gravity is perpendicular to its velocity

so as we know that

now we have centripetal acceleration a = 32 ft/s^2 as its perpendicular to velocity

while tangential acceleration at the same moment will be zero

so

now radius of curvature is given as

so the radius of curvature just after it is dropped is 703.125 ft

energy stored in the capacitor= 9.72 x 10⁻⁴ j

explanation:

the energy stored in the capacitor is given by

e= 1/2 c v²

e= energy stored

c= capacitance= 1.5 µc= 1.5 x 10⁻⁶f

v= potential difference=36 v

so energy stored= e= 1/2 (1.5 x 10⁻⁶) (36)²

energy stored= 9.72 x 10⁻⁴j