Physics, 14.01.2021 06:40 duhitzmay9395

I have two questions 1. "Explain the relationship between amplitude and energy"

2."Explain the relationship between frequency and energy"

Answers: 3

Show answers

Answers

Answer from: sam10146

1)The energy transported by a wave is directly proportional to the square of the amplitude. So whatever change occurs in the amplitude, the square of that effect impacts the energy. This means that a doubling of the amplitude results in a quadrupling of the energy

2)Just as wavelength and frequency are related to light, they are also related to energy. The shorter the wavelengths and higher the frequency corresponds with greater energy. So the longer the wavelengths and lower the frequency results in lower energy.

Explanation:

Answer from: Kennedy3449

The correct answer to the question is : C) A pendulum swings back and forth.
EXPLANATION:
Before answering this question, first we have to understand the law of conservation of energy.
As per law of conservation of energy, energy can neither be created not be destroyed. It can only change from one form to another form, and the total energy of the universe is always constant.
As per the question, we have a pendulum which is moving back and forth.
Let us consider a pendulum which is taken to some height from its equilibrium or mean point. The energy possessed by the pendulum at this height is gravitational potential energy. When the pendulum is released, the potential energy is converted into kinetic energy. At mean point, whole of its potential energy is converted into kinetic energy.
Due to inertia, the pendulum reaches at the other extreme point. During its movement from mean point to extreme point, the kinetic energy is converted into potential energy. At extreme point, whole of its kinetic energy must have converted into potential energy. The same process will be repeated.
Hence, it obeys law of conservation of energy.
Hence, swinging of pendulum back and forth is the best example to demonstrate the law of conservation of energy.

Answer from: Quest

An atom (ours, not carroll's) consists of a positively charged nucleus, surrounded by one or more negatively charged particles called electrons. the positive charges equal the negative charges, so the atom has no overall charge; it is electrically neutral. most of an atom's mass is in its nucleus; the mass of an electron is only 1/1836 the mass of the lightest nucleus, that of hydrogen. although the nucleus is heavy, it is quite small compared with the overall size of an atom. the radius of a typical atom is around 0.1 to 0.25 nanometres (nm), whereas the radius of a nucleus is about 10-6 nm. * if an atom were enlarged to the size of the earth, its nucleus would be only 200 feet in diameter and could easily rest inside a small football stadium.read more on -

Answer from: Quest

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water

Another question on Physics

Physics, 21.06.2019 23:30

A175 g lump of molten lead at its melting point (327 c) is placed into 55.0 g of water at 20.0 c. the specific heat of lead is 130.j/kg c and the hf of lead is 20,400 j/kg. when the lead and the water have reached equilibrium, what is the temperature of the mixture?

Answers: 3

Answer

Physics, 22.06.2019 03:00

An internally reversible refrigerator has a modified coefficient of performance accounting for realistic heat transfer processes of where qin is the refrigerator cooling rate, qout is the heat rejection rate, and is the power input. show that copm can be expressed in terms of the reservoir temperatures tc and th, the cold and hot thermal resistances rt,c and rt,h, and qin, as where rtot rt,c rt,h. also, show that the power input may be expressed as 1.39 a household refrigerator operates with cold- and hot-temperature reservoirs of tc 5 c and th 25 c, respectively. when new, the cold and hot side resistances are rc,n 0.05 k/w and rh,n 0.04 k/w, respectively. over time, dust accumulates on the refrigeratorâ€™s condenser coil, which is located behind the refrigerator, increasing the hot side resistance to rh,d 0.1 k/w. it is desired to have a refrigerator cooling rate of qin 750 w. using the results of problem 1.38, determine the modified coefficient of performance and the required power input w under (a) clean and (b) dusty coil conditions. internally reversible refrigerator qout qin w high-temperature reservoir low-temperature reservoir th th,i tc,i tc high-temperature side resistance low-temperature side resistance w qin th tc qinrtot tc qinrtot copm tc qinrtot th tc

Answers: 2

Answer

Physics, 23.06.2019 01:30

Hydroelectricity provides about 7 percent of the electricity generated in the united states. (a) explain how a hydroelectric power plant converts energy stored in water into electricity. (b) identify two factors that determine the amount of electricity that can be generated by an individual hydroelectricity power plant. (c) describe the two main types of land-based hydroelectric power plants. (d) describe two economic advantages and two environmental disadvantages of hydroelectricity.

Answers: 1

Answer

Physics, 23.06.2019 02:00

Consider an air-filled charged capacitor. how can its capacitance be increased?

Answers: 2

Answer

You know the right answer?

I have two questions 1. "Explain the relationship between amplitude and energy"

2."Expl...

Questions