During a stress-strain test, the unit deformation at a stress of 35 MPa was observed to 0.00000167 m/m and at a stress of 140 MPa it was 0.00000667 m/m. If the proportional limit was 200 MPa, what is the strain corresponding to 80 MPa?

Antireflective coatings on solar cells are often made by applying a thin film of silicon nitride (sinx), which has an index of refractive of 1.2, on the top of the silicon solar cell, which has a refractive index of about 3.5. however, the sun emits radiation of various wavelengths which the solar cell absorbs, and the antireflective coating can only absolutely minimize the reflection of one of these wavelengths. the coating thickness is chosen to reduce the reflection of green/yellow light (e = 2.2 ev), which is the most intense color in the solar spectrum (shown below). which of the following coatings would minimize reflection of green/yellow light? the answer is 820 nm how? what is the angular width of the central maximum of an electron traveling at 2 x 108 m/s going through a single slit of width 1 mm.

One number is said to be an "order of magnitude" larger than another number if choose one: a. it is 10 times larger. b. it is 5 times larger. c. it is 3 times larger. d. it is 100 times larger. e. it is 2 times larger.

Abumper car with a mass of 250 kg is traveling at a speed of 4 m/s. this bumper car collides and sticks to a second bumper car with a mass of 250 kg, which is initially at rest. what is the final speed of these two bumper cars after the collision, assuming they remain stuck together?