A bowling pin is thrown vertically upward such that it rotates as it moves through the air, as shown in the figure. Initially, the center of mass of the bowling pin is moving upward with a speed of 10 The maximum height of the center of mass of the bowling pin is most nearly

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Positrons are spontaneously emitted from the nuclei of

The sound level near a noisy air conditioner is 70 db. if two such units operate side by side, the sound level near the, would bea. 70dbb. 73 dbc. 105 dbd 140 db