subject
Physics, 05.05.2020 21:17 kale2158

What is the electrical force between q1 and q2? Recall that k = 8.99 × 109 N•meters squared over Coulombs squared.. 4.3 × 10 N 3.5 × 10 N –5.4 × 10 N –5.8 × 10 N?

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 23:20
Initially, a particle is moving at 5.33 m/s at an angle of 37.9° above the horizontal. two seconds later, its velocity is 6.11 m/s at an angle of 54.2° below the horizontal. what was the particle's average acceleration during these 2.00 seconds in the x-direction (enter first) and the y-direction?
Answers: 1
question
Physics, 22.06.2019 18:00
Air enters a gas turbine with two stages of compression and two stages of expansion at 100 kpa and 17°c. this system uses a regenerator as well as reheating and intercooling – the intercooler returns the air to the inlet temperature. the pressure ratio across each compressor is 4 ; 300 kj/kg of heat are added to the air in each combustion chamber; and the regenerator operates perfectly while increasing the temperature of the cold air by 20°c. determine the system’s thermal efficiency. assume isentropic operations for all compressor and the turbine stages and use constant specific heats at room temperature. (0.378)
Answers: 3
question
Physics, 22.06.2019 19:50
An air-filled capacitor is formed from two long conducting cylindrical shells that are coaxial and have radii of 26 mm and 103 mm. the electric potential of the inner conductor with respect to the outer conductor is - 700 v (k = 1/4πε 0 = 8.99 × 109 n · m2/c2) the energy stored in a 1.0-m length of this capacitor is closest to
Answers: 1
question
Physics, 23.06.2019 04:31
Do you think you could give me the answers to #29?
Answers: 2
You know the right answer?
What is the electrical force between q1 and q2? Recall that k = 8.99 × 109 N•meters squared over Cou...
Questions
question
Chemistry, 01.07.2020 15:01