subject
Physics, 21.08.2019 16:20 user1234573

Describe briefly how half-wave and quarter wave want) b) if an (difference between "fast" and "slow" axes) is 105 for a material with n=1.5, calculate the minimum thickness of a 2 and wave plate for light with a wavelength 500nm. these are called "zero-order" waveplates c) zero-order waveplates are often difficult to make because they are very thin. to make it thicker and easier to manufacture, plates work (using diagrams if you we can make the optical path difference (n 1/2)a for a half wave plate and (n 1/4) a for a quarter wave plate, where n is any integer. if n 5 what are the new thicknesses for the waveplates? d) waveplates clearly do not work properly for all wavelengths. for b) (zero order waveplates) calculate the wavelength that i) the half waveplate would turn into a quarter waveplate e) do the same for the multiple order half waveplate and make a conclusion about the useable wavelength ranges for the zero-order compared to the multiple order waveplates 4. fiber bragg gratings a fiber bragg grating is written in a fiber (n-1.5) with a strength cm at -1550nm a) what is the bandwidth of the grating in nm? b) what is the reflectivity (in %) and transmission (in db)? c) if this grating were written in birefringent fiber where the diference in refractive index for the two polarizations, an 103, what is the separation in grating wavelengths for the two polarizations? d) will this grating be any good for filtering unpolarized light? k 2cm and length l- 2 5. optical data storage cd players use new blu-ray disc players use na0.85, - 405nm. a) what is the spot size for cd players b) what is the spot size for bluray players (use same formula as i) c) calculate the ratio of the focal spot area for the blu-ray disc player compared to cds (ie., ratio a bluray /a cd) d) assuming that the total information on the disc scales inversely with spot area, what would this predict for the number of gigabytes for a bluray disc (cd roms 700mb (1 mb 1 million bytes)? e) is the spot-size reduction itself enough to explain the increased data storage of bluray discs? objective with na= 0.45, and laser wavelength -780nm, whereas the an are f) what else could account for the difference?

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 22:30
Follow these directions and answer the questions. 1. shine a pencil-thin beam of light on a mirror perpendicular to its surface. (if you don't have a laser light as suggested in the video, you can make a narrow beam from a flashlight by making a cone from black construction paper and taping it over the face of the flashlight.) how does the light reflect? how does the relationship of incident to reflected ray relate to the reflection of water waves moving perpendicular to a barrier? 2. shine a pencil-thin beam of light on a mirror standing on a sheet of paper on the table (or floor) so that you can mark the incident ray and reflected ray. (you can support the mirror from the back by taping it to a wooden block.) 3. mark a line on the paper representing the reflective surface. (the reflective surface of a mirror is usually the back edge.) 4. draw a dashed line perpendicular to the mirror surface at a point where the incident and reflected ray meet. this perpendicular is called a normal to the surface. 5. measure the angles between the rays and the normal. the angle of incidence is the angle formed by the incident ray and the normal to the surface. the angle formed by the reflected ray and normal is called the angle of reflection (r). what is the angle of incidence? what is the angle of reflection? 6. repeat for several different angles. (see report sheet for details.) what appears to be the relationship between the angle of incidence and angle of reflection? in science 1204, what was the relationship for these two angles made by the reflection of waves in a ripple tank? 7. roll a ball bearing so that it hits a fixed, hard surface (a metal plate) at several angles (including head-on). observe the way in which the ball bearing reflects. what generalization can you make about how a ball bearing reflects from a wall? have you proved that light can only behave like a wave?
Answers: 1
question
Physics, 22.06.2019 09:00
The pressure proportional to the area a- inversely b- directly c- increase d-decrease
Answers: 2
question
Physics, 22.06.2019 18:00
Avector of magnitude 2 cannot be added to a vector of magnitude 3 so that the magnitude of the resultant is a. zero b. 1 c. 3 d. 5 e. 7
Answers: 1
question
Physics, 22.06.2019 20:40
Ablock of mass m = 2.5 kg is attached to a spring with spring constant k = 740 n/m. it is initially at rest on an inclined plane that is at an angle of theta= 26 with respect to the horizontal, and the coefficient of kinetic friction between the block and the plane is uk = 0.17. in the initial position, where the spring is compressed by a distance of d = 0.16 m, the mass is at its lowest position and the spring is compressed the maximum amount. take the initial gravitational energy of the block as zero. the block's initial mechanical energy is 9.472 j.b. if the spring pushes the block up the incline, what distance l in meters will the block travel before coming to rest? the spring remains attached to both the block and the fixed wall throughout its motion.
Answers: 3
You know the right answer?
Describe briefly how half-wave and quarter wave want) b) if an (difference between "fast" and "slow"...
Questions
question
Mathematics, 29.01.2022 14:00
question
Mathematics, 29.01.2022 14:00
question
Mathematics, 29.01.2022 14:00
question
Biology, 29.01.2022 14:00
question
Mathematics, 29.01.2022 14:00