Engineering, 25.05.2021 01:00 ceceallen2003
Ammonia enters a control volume operating at steady state at p1 = 16 bar, T1 = 328 0C, with a mass flow rate of 1.5 kg/s. Saturated vapor at 6 bar leaves through one exit and saturated liquid at 6 bar leaves through a second exit with a volumetric flow rate of 0.10 m3/min. Determine:
(a) the minimum diameter of the inlet pipe, in cm, so the ammonia velocity at the inlet does not exceed 18 m/s.
(b) the volumetric flow rate of the exiting saturated vapor, in m^3/min.
Answers: 3
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Ammonia enters a control volume operating at steady state at p1 = 16 bar, T1 = 328 0C, with a mass f...
Mathematics, 13.03.2020 09:01
Mathematics, 13.03.2020 09:01
Health, 13.03.2020 09:03
History, 13.03.2020 09:05
Mathematics, 13.03.2020 09:06
Mathematics, 13.03.2020 09:06
History, 13.03.2020 09:06
Computers and Technology, 13.03.2020 09:07