subject
Engineering, 04.05.2021 01:20 dakshshberry

5. (5 points) Select ALL statements that are TRUE A. For flows over a flat plate, in the laminar region, the heat transfer coefficient is decreasing in the flow direction B. For flows over a flat plate, in the turbulence region, the heat transfer coefficient is decreasing in the flow direction C. For flows over a flat plate, the transition from laminar to turbulence flow only happens for rough surface D. For flows over a flat plate, if the length of the plate in the flow direction is long enough, the flows will inevitably become turbulent E. In general, turbulence flows have a larger heat transfer coefficient compared to laminar flows 6. (5 points) Select ALL statements that are TRUE A. For the flow in a pipe with constant cross-section area, both hydrodynamic and thermal boundary layer thicknesses increasingly grow in the flow direction B. In the hydrodynamic fully developed region, the mean velocity of the flow becomes constant C. In the thermally fully developed region, the mean temperature of the flow becomes constant D. For internal flows, if Pr>1, the flows become hydrodynamically fully developed before becoming thermally fully developed E. For internal flows, if Pr>1, the flows become thermally fully developed before becoming hydrodynamically fully developed

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
question
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
5. (5 points) Select ALL statements that are TRUE A. For flows over a flat plate, in the laminar reg...
Questions
question
History, 08.06.2021 03:00
question
Mathematics, 08.06.2021 03:00