subject
Engineering, 12.03.2021 15:00 koryn4880

A steel tape with a cross sectional area of 0.04 cm2 and weighing 1 kg has a length of 30.01 m between the zero and the 30m marks, when supported throughout at 22 degree C and subject to a tension of 6 kg. This tape is used to measure a distance along a horizontal ground and is supported throughout during the measurement. The tension applied is 13 kg. The temperature of the tape is 6 degree C. The measured slope distance is recorded as 370m. What is the corrected horizontal distance? (Use K = 1.15 Times 10^-5/degree C per m and E = 2.1 Times 10^6 kg/cm^2)

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
question
Engineering, 04.07.2019 19:20
List 3 options on how to reduce knocking problens during engine process,
Answers: 2
You know the right answer?
A steel tape with a cross sectional area of 0.04 cm2 and weighing 1 kg has a length of 30.01 m betwe...
Questions
question
Biology, 20.02.2020 04:02
question
Health, 20.02.2020 04:02