When testing the voltage drop on the positive side of the starter circuit (high current side), connect the red voltmeter lead to: Select one:
tot
a. the input of the starter motor.
O
b. the battery negative post.
c. the "S" terminal of the solenoid.
0
d. the battery positive post.

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.