Engineering, 22.09.2020 18:01 de5briz75

A cylindrical water-storage tank has a height of 7.5 m and a radius of 6.2 m. The storage tank is full of water but is vented to the atmosphere. The bottom of the tank is 29 m off the ground. A 13 cm diameter pipe runs vertically down from the tank and goes 1.8 m underground before turning horizontal. The water flow in the horizontal pipe is 87 L/s. 1. What is the water pressure (gauge) in the horizontal pipe underground?
2. How fast does the water level in the tank drop?
3. bUTch Jones drills a 6.5 mm diameter hole near the bottom of the tank. How fast does the water shoot out?
4. What volume flow of water is lost out the hole?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

You know the right answer?

A cylindrical water-storage tank has a height of 7.5 m and a radius of 6.2 m. The storage tank is fu...

Questions