subject
Engineering, 06.05.2020 03:38 shayshayyy41

The pulse train and the Fourier series The pulse train is a periodic signal that has a Fourier series which coefficients Cn can be found using a generic equation. If the pulse train as magnate A= 12, with T= 1 milisecond and tao = to 0.25 milliseconds Determine the following: 1_ Using the generic equation for Cn, determine the Cn coefficients from n= -8 to n=8 (remember that negative Cn’s from -1 to -8, will have the same amplitude as the positive Cn’s coefficients from 1 to 8). 2_ Determine the fundamental frequency fo 3_ what are the values of the harmonic frequencies, f2=2xfo, f3=3xfo … f8? 4_ For what values of the harmonic frequencies the Cn coefficients will be equal to zero? 5_ Find the magnitude and phase of Cn from n=-8 to n=8. Note: The coefficients Cn are complex numbers, Complex Cn= real{Cn} +j Im{Cn}, for the pulse train all the Im{Cn} terms are equal to zero. Them Mag = SQR[Real^2 + Imaginary^2)] and

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
question
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
You know the right answer?
The pulse train and the Fourier series The pulse train is a periodic signal that has a Fourier serie...
Questions
question
Social Studies, 31.07.2019 06:40