Engineering, 05.05.2020 21:29 AdanNava699
15.27 An 18-tooth pinion with a diametral pitch of 6 rotates 1800 rpm and drives a 36-tooth gear at 900 rpm in a gear speed reducer. The pinion and gear with 20 ° full-depth involute teeth are keyed to shafts that are simply supported by bearings. The bearings on each shaft are 2.0 in. from the gear center. If the gears transmit 0.5 hp, what are the forces on the pinion, gear, and shafts?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:20
Wiy doeres rere okhn a pump whon working betwon the same pressure range?
Answers: 2
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
Engineering, 04.07.2019 19:10
Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]
Answers: 3
You know the right answer?
15.27 An 18-tooth pinion with a diametral pitch of 6 rotates 1800 rpm and drives a 36-tooth gear at...
Questions
Mathematics, 12.04.2021 21:00
Spanish, 12.04.2021 21:00
English, 12.04.2021 21:00
English, 12.04.2021 21:00
Mathematics, 12.04.2021 21:00
Mathematics, 12.04.2021 21:00
Mathematics, 12.04.2021 21:00
Mathematics, 12.04.2021 21:00
