subject
Engineering, 24.04.2020 16:02 riptaylorsreputation

A 10-cm thick aluminum plate (rho = 2702 kg/m^3, cp = 903 J/kg·K, k = 237 W/m·K, and α = 97.1 × 10^–6 m^2/s) is being heated in liquid with temperature of 500°C. The aluminum plate has a uniform initial temperature of 25°C. If the convection heat transfer coefficient between the surface and the plate is 4740 W/m^2.K.

Required:
Determine the temperature at the center plane of the aluminum plate after 15 seconds of heating.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
question
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
You know the right answer?
A 10-cm thick aluminum plate (rho = 2702 kg/m^3, cp = 903 J/kg·K, k = 237 W/m·K, and α = 97.1 × 10^–...
Questions
question
Chemistry, 01.09.2019 19:30