subject
Engineering, 22.04.2020 03:01 akatsionis25

Consider a vapour compression refrigeration cycle that uses R-134a as refrigerant. The R-134a enters the compressor as a saturated vapour at 200 kPa, and exits the condenser as a saturated liquid at 900 kPa. The rate of refrigeration of the cycle is to be 6.0 tons of refrigeration (1 ton of refrigeration = 3.517 kW). The compressor isentropic efficiency is 80%. Determine: a) The temperature of evaporation and condensation of the refrigerant

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 19:10
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
question
Engineering, 04.07.2019 19:20
Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?
Answers: 1
You know the right answer?
Consider a vapour compression refrigeration cycle that uses R-134a as refrigerant. The R-134a enters...
Questions