Engineering, 21.04.2020 20:18 bee1538

Consider a combined gas-steam power plant that has a net power output of 450 MW. The pressure ratio of the gas turbine cycle is 14. Air enters the compressor at 300 K and the turbine at 1400 K. The combustion gases leave the heat turbine are used to heat the steam at 8 MPa to 400oC in a heat exchanger. The combustion gases leave the heat exchanger at 460 K. An open feedwater heater incorporated with the steam cycle operates at a pressure of 0.6 MPa. The condenser pressure is 2o kPa. Assuming the isentropic efficiencies of 95% for the water pump, 82% for the compressor, and 86% for the gas and steam turbines. Investigate in details the effects of the gas cycle pressure ratio as it is varied from 10 to 20 (on a step of one) on the ration of gas flow rate to steam flow rate and cycle thermal efficiency. Plot your results as function of gas cycle pressure ratio, and discuss the results in details.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 12:10

On a average work day more than work place firs are reorted

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

Answer

Engineering, 04.07.2019 19:10

For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.

Answers: 2

Answer

You know the right answer?

Consider a combined gas-steam power plant that has a net power output of 450 MW. The pressure ratio...

Questions