subject
Engineering, 30.03.2020 22:18 kenzie19169

A hot-water stream at 60oC enters a mixing chamber with a mass flow rate of 0.5 kg/s where it is mixed with a stream of cold water at 10oC. If it is desired that the mixture leave the chamber at 41oC, determine the mass flow rate of the cold-water stream. Assume all the streams are at a pressure of 250 kPa.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
You know the right answer?
A hot-water stream at 60oC enters a mixing chamber with a mass flow rate of 0.5 kg/s where it is mix...
Questions
question
History, 02.03.2021 20:10
question
English, 02.03.2021 20:10