Engineering, 30.03.2020 22:17 ashlyo

Chapter 15 – Fasteners: Determine the tensile load capacity of a 5/16 – 18 UNC thread and a 5/16 – 24 UNF thread made of the same material. Which is stronger?

Make the same comparison for M8 x 1.25 and M8 x 1 ISO threads. Hint: see Tables 15-1, 15-2, and 15-3

Answers: 2

Show answers

Answers

Answer from: Capicus8710

The 5/16 – 24 UNF is stronger because it has more tensile load capacity.

Tensile load capacity for M8 -1.25 = 5670 lb

Tensile load capacity for M8 -1 = 6067 lb

Explanation:

For 5/16 - 18 UNC thread:

D = 0.3125

n = 18

Therefore the tensile load capacity is = 100000 X (0.7854 X (0.3125 - 0.9743/ 18) ^2

= 5243 lb.

Similarly for 5/16 - 24 UNF , only the n value changes to 24

we get the tensile load capacity = 5806.6 lb

Hence the 5/16 – 24 UNF is stronger because it has more tensile load capacity.

For metric Bolts:

We have to consider all values in SI units

Strength = 689 MPa

We get for M8 -1.25:

Tensile load capacity as = 689 X 36.6 = 25223 N = 5670 lb

For M8 -1:

Tensile load capacity as = 689 X 39.167 = 26986 N = 6067lb

Answer from: arianawelsh123l

The material strength is given as 100,000 PSI

To find the tensile load capacity of a threaded rod, we multiply the Strength of the material with the Stress area for the bolt.

A_{t} = 0.7854 (D - \{0.9743}{n})^{2}

Where D is the Basic Major Diameter

n is the Number of threads per inch

At is the Tensile strength area of the bolt.

For 5/16 - 18 UNC thread

D = 0.3125

n = 18

Therefore the tensile load capacity is = 100000 X (0.7854 X (0.3125 - 0.9743/ 18) ^2

= 5243 lb.

Similarly for 5/16 - 24 UNF , only the n value changes to 24

we get the tensile load capacity = 5806.6 lb

Hence the fine thread bolt is stronger because it has more tensile load capacity.

For metric Bolts

We have to consider all values in SI units

Strength = 689 MPa

We get for M8 -1.25

Tensile load capacity as = 689 X 36.6 = 25223 N = 5670 lb

For M8 -1

Tensile load capacity as = 689 X 39.167 = 26986 N = 6067N

Strength of 5/16 - 14 Acme thread

We use the imperial fomula as mentioned above,

The tensile capacity is 4634 lb.

Answer from: Quest

more information

explanation:

Answer from: Quest

answer:

Thanks Again ☺♥

Can I be Brainliest!!

Another question on Engineering

Engineering, 04.07.2019 18:10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

What are the major differences between injection molding and extrusion?

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?

Answers: 1

Answer

You know the right answer?

Chapter 15 – Fasteners: Determine the tensile load capacity of a 5/16 – 18 UNC thread and a 5/16 – 2...

Questions