Engineering, 25.03.2020 16:52 Christyy1837

Point A needs to send a 50 kb file to point B. Each packet will contain L = 1000 bits of data. The distance between Points A and B is d = 50 km. The propagation velocity is V = 2 x 108 m/sec. The transmit data rate is N = 10 Mbps. Sliding Window flow control is used with a window size (W) of five. Both points A and B have buffers large enough to handle the sliding window protocol.

How long would it take to transfer the file from point A to point B?

a. Time to transmit one frame:
b. Time to transmit W frames:c. Time to propagate last bit of the first frame from A to B:
d. Time to propagate ACK frame from B to A:
e. Total time to transmit and acknowledge first frame:
f. Time to transfer file:

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

What is creep? what is stress relaxation?

Answers: 1

Answer

You know the right answer?

Point A needs to send a 50 kb file to point B. Each packet will contain L = 1000 bits of data. The d...

Questions