Engineering, 21.03.2020 03:15 mendezmarco2004

A runway used for landing only is used by two types of aircraft, one with an airspeed of 120 knots (nautical miles/hr) and the other with an airspeed of 150 knots. The length of common approach path is 6 nautical miles. A minimum distance separation of 3 nautical miles must be maintained by aircraft on the common approach path. Runway occupancy time for both types of aircraft is 60 seconds. (a) Use space-time diagrams to determine the time separations (in seconds) at the runway threshold for each aircraft pair. Present your results in matrix form. (b) If 40 percent of the aircraft travel at 120 knots and 60 percent at 150 knots, and the buffer matrix below is used (data in seconds), what is the capacity of the runway in aircraft per hour?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

You know the right answer?

A runway used for landing only is used by two types of aircraft, one with an airspeed of 120 knots (...

Questions