subject
Engineering, 19.03.2020 05:00 Chente379

As an employee of the Los Angeles Air Quality Commission, you have been asked to develop a model for computing the distribution of NO2 in the atmosphere. The situation you are to consider is one in which the molar flux of NO2 at ground level, NAo, is known; this flux is attributed to automobile and smokestack emissions. It is also known that the concentration of NO2 at a distance well above ground level is zero and that NO2 reacts chemically in the atmosphere. In particular, NO2 reacts with unburned hydrocarbons (in a process that is activated by sunlight) to produce PAN (peroxyacetylnitrate), the final product of photochemical smog. The reaction is first order, and the local rate at which it occurs may be expressed as N_A = −k₁C_A.
(a) Assuming steady-state conditions and a stagnant atmosphere, obtain an expression for the vertical distribution C_A(x) of the molar concentration of NO2 in the atmosphere.
(b) If a NO2 partial pressure of p_A = 2×10^(−6) bar is sufficient to cause pulmonary damage, what is the value of the ground level molar flux for which you would issue a smog alert? You may assume an isothermal atmosphere at T = 300 K, a reaction coefficient of k_1 = 0.03 s^(−1), and a NO2−air diffusion coefficient of DAB = 0.15×10^(−4) m^2/s.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
You know the right answer?
As an employee of the Los Angeles Air Quality Commission, you have been asked to develop a model for...
Questions
question
History, 26.05.2020 22:02
question
Mathematics, 26.05.2020 22:02