Engineering, 19.03.2020 05:01 cecialva
A three-phase load is supplied from a 2.4-kV:460-V, 150-kVA transformer whose equivalent series impedance is 0.038 j0.135 per unit on its own base. The load voltage is observed to be 438 V line-line, and it is drawing 95 kW at unity power factor. Calculate the voltage at the high voltage side of the transformer. Perform the calculations on a 460-V, 100-kVA base.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
You know the right answer?
A three-phase load is supplied from a 2.4-kV:460-V, 150-kVA transformer whose equivalent series impe...
Questions
Mathematics, 27.11.2019 18:31
Mathematics, 27.11.2019 18:31
Mathematics, 27.11.2019 18:31
Mathematics, 27.11.2019 18:31
History, 27.11.2019 18:31
Social Studies, 27.11.2019 18:31
Mathematics, 27.11.2019 18:31
Mathematics, 27.11.2019 18:31
Mathematics, 27.11.2019 18:31
Engineering, 27.11.2019 18:31
Law, 27.11.2019 18:31
