Engineering, 07.03.2020 00:18 shan8747

Assuming D=0.6, determine the ratio Vo/Vin QUESTION 7 In the previous question, determine IL/Io. QUESTION 8 Determine the RMS value of the following waveform (first do something about the second and 3rd terms). v(t) = 3 + 10cos(wt) + 5 sin(wt) + 4 cos(3wt) + 2sin(7wt-30) QUESTION 9 Consider the following signal: Starts at the origin. Linearly decreases to -1 by T/6. Remains at -1 until T/3. Then linearly increases to 1 by 2T/3. Remains at 1 for another T/6, and then decreases linearly to 0 at T. T is the period. Solve for a0 QUESTION 10 For the previous question, solve for a5 QUESTION 11 From Question 9, solve for b5. QUESTION 12 From Question 9, solve the RMS value of the fundamental component.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

You know the right answer?

Assuming D=0.6, determine the ratio Vo/Vin QUESTION 7 In the previous question, determine IL/Io. QUE...

Questions