subject
Engineering, 27.02.2020 19:28 Csoard2004

A rod made of 60-40 brass is sliding over unlubricated hardened tool steel with a load of 320 N. The hardness of brass is 520 MN/m2. The wear co-efficient is 10-3. Find: a. The distance traveled to produce a wear of volume of 0.01 mm3 by the adhesive wear of the brass rod. b. The distance traveled, if additional load of 0.0069 kN is applied and a wear volume 7 mm3

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
question
Engineering, 04.07.2019 19:20
Determine the stoichiometric and actual air-fuel ratios and the mole flue gas composition for combustion with 15% excess air for raw indiana, pennsylvania raw coal.
Answers: 3
question
Engineering, 04.07.2019 19:20
List 3 options on how to reduce knocking problens during engine process,
Answers: 2
question
Engineering, 06.07.2019 02:30
In a unit cell of fcc structure, indicate the position of one of the tetrahedral interstitial sites by plotting the corresponding tetrahedron. do the same for one of the octahedral interstitial sites (in a separate fcc unit cell). mark the positions of all the tetrahedral and octahedral interstitial sites in the unit cells. how many equivalent tetrahedral sites and how many equivalent octahedral sites are contained in a fcc unit cell, respectively. what is the coordination number for a tetrahedral site and what is the coordination number for an octahedral site?
Answers: 2
You know the right answer?
A rod made of 60-40 brass is sliding over unlubricated hardened tool steel with a load of 320 N. The...
Questions
question
English, 30.10.2020 16:50
question
Mathematics, 30.10.2020 16:50