subject
Engineering, 25.02.2020 00:58 nae467

9.96 Air at 3.4 bar, 530 K, and a Mach number of 0.4 enters a convergingā€“diverging nozzle operating at steady state. A normal shock stands in the diverging section at a location where the Mach number is Mx = 1.8. The flow is isentropic, except where the shock stands. The air behaves as an ideal gas with k = 1.4. Determine a. the stagnation temperature Tox, in K. b. the stagnation pressure pox, in bar. c. the pressure px, in bar. d. the pressure py, in bar. e. the stagnation pressure poy, in bar. f. the stagnation temperature Toy, in K. g. If the throat area is 7.6 Ɨ 10āˆ’4 m2, and the exit plane pressure is 2.4 bar, determine the mass flow rate, in kg/s, and the exit area, in m2

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
You know the right answer?
9.96 Air at 3.4 bar, 530 K, and a Mach number of 0.4 enters a convergingā€“diverging nozzle operating...
Questions