Engineering, 25.02.2020 00:58 aashna66

" An existing equal-tangent sag vertical curve is designed for 60 mi/h. The initial grade is –3% and the elevation of the PVT is 754 ft. The PVC of the curve is at station 134 + 16 and the PVI is at 137 + 32. An overpass is being constructed directly above the PVI. The highway is for cars only (AASHTO minimum and recommended structure clearances do not apply) and the overpass design assumes the driver’s eye height is set conservatively to 5 ft. What is the lowest possible elevation of the bottom of the overpass structure to ensure sufficient stopping sight distance at 60 mi/h?"

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

Answer

You know the right answer?

" An existing equal-tangent sag vertical curve is designed for 60 mi/h. The initial grade is –3% and...

Questions