subject
Engineering, 15.02.2020 00:55 gabrielolivas59

An airflow of 1,000 L/s flows through a round sheet metal duct that is 300 mm in diameter and 100 m long. The air temperature is 12 C and the pressure is atmospheric. Determine the friction pressure drop (Pa). Use Equation 3.47 in the textbook to calculate the friction factor.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
You know the right answer?
An airflow of 1,000 L/s flows through a round sheet metal duct that is 300 mm in diameter and 100 m...
Questions
question
English, 18.02.2020 05:55
question
Health, 18.02.2020 05:55