Engineering, 18.02.2020 05:55 ttwright24

Leonardo Pisano Fibonacci, a famous thirteenth-century mathematician, generated the sequence of integers 10,1, 1,2, 3, 5, 8, 13, 21,34. ...^ while addressing, oddly enough, a problem in volving rabbit reproduction. An element of the Fibonacci sequence is the sum of the previous two. (a) Find the constant-coefficient difference equation whose zero-input response f[n] with aux- iliary conditions [-0 and 2s a Fibonacci sequence. Given f[n] is the system output, what is the system input? (b) What are the characteristic roots of this system? Is the system stable? (c) Designating 0 and 1 as the first and second Fibonacci numbers, determine the fiftieth Fi- bonacci number. Determine the thousandth Fibonacci number.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 19:20

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2

Answers: 2

Answer

Engineering, 06.07.2019 02:30

On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)

Answers: 2

Answer

Engineering, 06.07.2019 04:10

Aspherical thermocouple measurement errors a spherical thermocouple made of constantin transfer coefficient between the gas and the thermocouple is h used to measure the temperature of a gas. the heat 400 w/m2 k. calculate the maximum diameter d of the thermocouple if the thermocouple's measurement error should be w 23 within 5% of the initial temperature difference in 5 seconds. for constantin, k 8920 kg/m3, and c 410 j/kg. k.

Answers: 3

Answer

You know the right answer?

Leonardo Pisano Fibonacci, a famous thirteenth-century mathematician, generated the sequence of inte...

Questions