subject
Engineering, 24.12.2019 21:31 lizchavarria863

A3-phase induction motor with 4 poles is connected to a voltage source with an amplitude of 209 vrms and a frequency of 120 hz. the circuit has negligible line impedance and you can assume the simplified circuit model is valid. the motor has rs = 2.3 latex: \omegaĻ‰, r'r = 0.7 latex: \omegaĻ‰, xs = 1.3 latex: \omegaĻ‰, x'r = 1.8 latex: \omegaĻ‰ , and xm = 76 latex: \omegaĻ‰. in addition, the motor is spinning at a speed of 2,464 rpm. what is the output torque at the specified speed in nm?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 19:10
What is creep? what is stress relaxation?
Answers: 1
question
Engineering, 04.07.2019 19:10
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30Ā°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
question
Engineering, 04.07.2019 19:20
Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90Ā° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.
Answers: 1
You know the right answer?
A3-phase induction motor with 4 poles is connected to a voltage source with an amplitude of 209 vrms...
Questions