subject
Engineering, 20.12.2019 18:31 19King73

The air velocity in the duct of a heating system is to be measured by a pitot-static probe inserted into the duct parallel to the flow. if the differential height between the water columns connected to the two outlets of the probe is 2.4 cm, determine

(a) the flow velocity and
(b) the pressure rise at the tip of the probe. the air temperature and pressure in the duct are 45°c and 98 kpa, respectively.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
The air velocity in the duct of a heating system is to be measured by a pitot-static probe inserted...
Questions
question
Mathematics, 25.01.2021 03:20