subject
Engineering, 18.12.2019 05:31 justinb0829

Aresistance spot welding operation is performed on two pieces of 0.040 in thick sheet steel with unit melting energy of 150 btu/in3. it takes 9500 a and 0.17 sec to complete a weld nugget of φ0.190 in and 0.060 in thick.
assume the resistance of 100 micro-ohms. a) calculate the average power density in the interface area defined by the weld nuggetb) find the percentage of energy generated that went into formation of the weld nugget (i. e, calculate the ratio eweld / esource)

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
question
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
You know the right answer?
Aresistance spot welding operation is performed on two pieces of 0.040 in thick sheet steel with uni...
Questions
question
Business, 27.01.2021 16:10
question
Mathematics, 27.01.2021 16:10