subject
Engineering, 17.12.2019 07:31 straightbarz8901

The xyz corporation has been advised by a state pollution control authority that it has 60 days to apply for a permit to discharge manufacturing wastes into a receiving body of water. xyz is also advised of the minimum standard for water quality in the receiving body that must be met. in an effort to convince the authority that the receiving body of water after receiving the manufacturing wastes will still meet established environmental standards, the corporation employs engineer doe to perform consulting engineering services and submit a detailed report. after completion of his studies but before completion of any written report, doc concludes that the discharge from the plant will lower the quality of the receiving body of water below established standards. he further concludes that corrective action will be very costly. doc verbally advises the xyz corporation of his findings. subsequently, the corporation terminates the contract with doe with full payment for services performed, and instructs doe not to render a written report to the corporation. thereafter. doe learns that the authority has called a public hearing and that the xyz corporation has presented data to support its view that the present discharge meets minimum. doc have an ethical obligation to report his findings to the authority upon learning of the ring? explain your reasoning.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
question
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
question
Engineering, 04.07.2019 19:20
Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?
Answers: 1
You know the right answer?
The xyz corporation has been advised by a state pollution control authority that it has 60 days to a...
Questions
question
Mathematics, 08.04.2020 01:44
question
Biology, 08.04.2020 01:44