subject
Engineering, 30.11.2019 02:31 goreeefk4939

An ideal heat pump supplies heat energy to a house at the rate of 140,000 kj/h when the house is maintained at 25°c. over a period of one month, the heat pump operates for 100 hours to transfer energy from a heat source outside the house to inside the house. consider an ideal heat pump receiving heat from two different outside energy sources. in one application the ideal heat pump receives heat from the outside air at -10°c. in a second application the heat pump receives heat from a lake having a water temperature of 10°c. if electricity costs $0.09/kwh, determine the maximum money (in dollars and cents) saved by using the lake water rather than the outside air as the outside energy source. (do not insert $ in your answer and be accurate to the penny).

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
question
Engineering, 04.07.2019 18:20
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
You know the right answer?
An ideal heat pump supplies heat energy to a house at the rate of 140,000 kj/h when the house is mai...
Questions
question
English, 08.10.2019 05:00