subject
Engineering, 15.11.2019 06:31 Itselliekojo2218

A2.4 liter, four stroke cycle engine is equipped with multipoint port fuel injection, having one injector per cylinder. the injectors are constant flow devices, so the fuel flow rate into the engine is controlled by the injection pulse duration. maximum power is obtained at wot when injection duration is continuous. at this condition, engine speed is at 5800 rpm with stoichiometric gasoline and an inlet pressure of 101 kpa. at idle condition, the engine speed is 600 rpm with stoichiometric gasoline and an inlet pressure of 30 kpa. volumetric efficiency can be considered 95% at wot. calculate:

a) fuel flow rate through an injector

b) injection pulse duration in seconds at idle conditions

c) injection pulse duration in degrees of engine rotation at idle conditions

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
You know the right answer?
A2.4 liter, four stroke cycle engine is equipped with multipoint port fuel injection, having one inj...
Questions
question
Mathematics, 04.12.2020 18:20
question
Mathematics, 04.12.2020 18:20