subject
Engineering, 09.11.2019 07:31 helo55

Revise the following sentences to convert the negative constructions to positive constructions. a. management accused williams of filing trip reports that were not accurate. b. we must make sure that all our representatives do not act unprofessionally to potential clients. 23. general readers might find the following sentences awkward or difficult to understand. refer to the advice on page 235, and rewrite the following sentences to eliminate the long noun strings. a. the research team discovered a glycerin-initiated, alkylene-oxide-based, long-chain polyether. b. we are considering purchasing a digital-imaging capable, diffusion-pump equipped, tungsten-gun sem.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
Revise the following sentences to convert the negative constructions to positive constructions. a. m...
Questions
question
Mathematics, 06.11.2019 05:31