subject
Engineering, 06.11.2019 21:31 ovebrown

Assume the gasoline is burned with 99% efficiency in a car engine, with 1% remaining unburned in the exhaust gases as vocs (volatile organic compounds). if the engine exhausts 16 kg of gases (mw=30) for each kg of gasoline (mw=100), calculate the fraction of vocs in the exhaust. give your answer in parts per million

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
question
Engineering, 06.07.2019 04:10
Aheat pump with refrigerant-134a as the working fluid is used to keep a space at 25°c by absorbing heat from geothermal water that enters the evaporator at 500c at a rate of 0.065 kg/s and leaves at 40°c. the refrigerant enters the evaporator at 20°c with a quality of 23 percent and leaves at the inlet pressure as saturated vapor. the refrigerant loses 300 w of heat to the surroundings as it flows through the compressor and the refrigerant leaves the compressor at 1.4 mpa at the same entropy as the inlet. determine: (a) the degrees of subcooling of the refrigerant in the condenser, b)-the mass flow rate of the refrigerant . (c) the heating load and the cop of the pump, and d)-the theoretical minimum power input to the compressor for the same heating load.
Answers: 3
You know the right answer?
Assume the gasoline is burned with 99% efficiency in a car engine, with 1% remaining unburned in the...
Questions
question
Mathematics, 25.01.2021 17:00
question
Business, 25.01.2021 17:00
question
Social Studies, 25.01.2021 17:00
question
English, 25.01.2021 17:00
question
Mathematics, 25.01.2021 17:00
question
Chemistry, 25.01.2021 17:00
question
Mathematics, 25.01.2021 17:00