Engineering, 26.10.2019 00:43 SkinnestXOXO

A240 hp (power-shift) dozer is used in a pushing operation. the dozer is equipped with a straight blade. the material (dry and noncohesive) weighs 98 pcf in the bank state. it is estimated the material will swell 6%, from bank to loose state. the center-of mass–to–center-of-mass pushing distance is 200 ft. job efficiency can be assumed to be equivalent to a 45-min hour. calculate the production in bcy per hour and the direct cost of the proposed earthmoving operation in dollars per bcy. the company's normal o& o cost for these machines is $95 per hour and the operator's wage is $15.00 per hour plus 40% for fringes, insurance, and worker's compensation. (207 bcy/hr, $0.561/bcy).

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

Answer

Engineering, 04.07.2019 19:20

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.

Answers: 2

Answer

You know the right answer?

A240 hp (power-shift) dozer is used in a pushing operation. the dozer is equipped with a straight bl...

Questions