Arigid tank of volume v is subdivided into two parts with volumes v1 = v/3 and v2 = 2v/3 using a rigid partition. volume v1 contains an ideal gas at 800◦c and pressure p1 while volume v2 is completely evacuated. now the partition between the two volumes is removed, upon which the ideal gas expands into the entire tank. heat is then applied to the gas until its pressure becomes equal to its initial pressure p1. determine the final temperature of the gas.

What precautions should you take to prevent injuries when dealing with heavy loads?

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?