Engineering, 15.10.2019 19:00 paulitaaustin

The affan industry has a 240v supply from which the following load are taken;
four hundred 150w lamp, three hundred 100w lamp, five hundred 80w lamp, two hundred 120w lamp and one hundred 60w lamp.
computer three 400w, 100kw and 1000kw.
air conditioner a total of 597kw.
photocopying machines 1000kw.
electric typewriter ten 500w.
assuming that the lighting load is on for a period of 6hours/2days the computer for 3hours per day, the air conditioner for 48hours per 24days, the photocopying machine for 48hours per day and the electric typewriter for 4hours per day calculate;
1. the weekly consumption of the industry in key when working on a 7days week.
2. what current is taken the computer load only if switched on?
3. if the affan add ten automatic voltage to his industry each taken a current of 4a, calculate the weekly consumption of the industry in kwh when working on a 5 day week. assuming that the load is on for a period of unity hour per day.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

You know the right answer?

The affan industry has a 240v supply from which the following load are taken;
four hundred 150...

Questions