subject
Engineering, 15.10.2019 19:00 brendacauani12345

Water is leaking out of an inverted conical tank at a rate of 1.5 cm3 /min at the same time that water is being pumped into the tank at a constant rate. the tank has height 10 cm and the diameter at the top is 6 cm. if the water level is rising at a rate of 1.0 cm/min when the height of the water is 2 cm, find the rate at which water is being pumped into the tank. (a) draw a picture of the situation for any time t. (b) what quantities are given in the problem? what is the unknown quantity you are looking for? (c) write an equation that relates the quantities. (d) finish solving the problem.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
You know the right answer?
Water is leaking out of an inverted conical tank at a rate of 1.5 cm3 /min at the same time that wat...
Questions
question
Mathematics, 19.03.2021 20:50