subject
Engineering, 09.10.2019 03:10 joejoefofana

Aboeing 777 lands at chicago o'hare airport (668 m elevation) where the pressure is 98.8 kpa. this 777 wing has a coefficient of lift of 1.46 and its wing area is 4618.8 ft^2. when the plane left st. louis, its mass was 225,982 kg. note that kilograms is mass not weight, so you need to convert it. during the flight to chicago, 7,534 liters of fuel was used, where the jet fuel weighs 0.781 kg/l.
what is the velocity in miles-per-hour at the point where the aircraft initially touches the ground?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 19:10
The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false
Answers: 2
You know the right answer?
Aboeing 777 lands at chicago o'hare airport (668 m elevation) where the pressure is 98.8 kpa. this 7...
Questions