subject
Engineering, 28.09.2019 00:30 knoel7990

Liquid water at 100 psia and 300f (state 1) enters an adiabatic throttling valve steadily with a mass flow rate of 20 lbm/s and exits at a pressure of 45 psia (state 2). fluid leaving the valve enters a rigid, insulated flash chamber; saturated liquid at 45 psia (state 3) and saturated vapor at 45 psia (state 4) exit from the flash chamber. saturated vapor exiting the flash chamber expands through an adiabatic turbine to a pressure of 3 psia (state 5). the isentropic efficiency of the turbine is 90%. assume that the surrounding pressure is 1 atm and temperature is 55f.(a) calculate the power (btu/s) produced by the turbine. (b) determine rate of exergy destruction (btu/s) for throttling valve, flash chamber, and turbine. (c) show the entire process on t-s diagram. label states, show property values, and indicate appropriate lines of constant pressure.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
Liquid water at 100 psia and 300f (state 1) enters an adiabatic throttling valve steadily with a mas...
Questions