subject
Engineering, 27.09.2019 23:30 brianna8739

Amultiple plate clutch, needs to be able to transmit a torque of 160 n. m. the external and internal diameters of the friction plates are 100 mm and 60 mm, respectively. if the friction coefficient between rubbing surfaces is 0.25 and pmax = 1.2 mpa, determine the total number of disks required, and the axial clamping force. state all assumptions made.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
You know the right answer?
Amultiple plate clutch, needs to be able to transmit a torque of 160 n. m. the external and internal...
Questions
question
Biology, 30.12.2020 01:00
question
Mathematics, 30.12.2020 01:00
question
Mathematics, 30.12.2020 01:00
question
Mathematics, 30.12.2020 01:00
question
English, 30.12.2020 01:00