Engineering, 30.08.2019 19:10 riley6247
Anotched member has an elastic stress concentration of kt = 3.00 and is made of a material and has an elastic, perfectly plastic stress-strain curve with e = 200 gpa and oys = 400 mpa. the member is loaded from zero to a nominal stress s, and then unloaded. a) determine the residual stress and strain after removal of s, for (i) s=250 mpa, and (b) si= - 250 mpa.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
Anotched member has an elastic stress concentration of kt = 3.00 and is made of a material and has a...
Questions
Physics, 05.05.2020 09:09
Spanish, 05.05.2020 09:09
Mathematics, 05.05.2020 09:09
Chemistry, 05.05.2020 09:09
Mathematics, 05.05.2020 09:09
History, 05.05.2020 09:09
Mathematics, 05.05.2020 09:09
