Two water reservoirs a and b are connected together through a 430m long pipe of 300 mm diameter and an inner surface roughness of e = 0.3 mm. a valve with a loss coefficient of k 0.75 (partially open) is fitted in the pipeline for flow control. if the water level in reservoir a is 30 m above b and ignoring other minor losses, calculate the water flow rate in the pipe using the iteration method and the moody chart.

On a average work day more than work place firs are reorted

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.